Security comes in may forms, but not one system protects you from everything.  That's why Safety & Security Film from Solar Gard is a great addition to any security system or as a stand alone system. 

Safety & Security Film provides valuable extra time in the case of an emergency.  From 4 mil to 14 mil, we have the added protection that you are looking for.

Care and Maintenance

Film Dry-out Time

The mounting solution used during the installation of your Solar Gard window

film may require a dry-out time. Cold or non-sunny weather conditions can

lengthen the dry-out time, while warm weather and direct sun light exposure

will shorten the dry-out time. Small water beads and a slightly cloudy look

may appear during the dry-out time. If slow drying does occur, do not

become alarmed. The film will dry-out.

DO NOT CLEAN THE FILM FOR 30 DAYS AFTER INSTALLATION.

Cleaning Instructions

To maximize the life of the window film, please follow these instructions

for proper care and maintenance.

• Always use clean, soft materials to wash and dry your window film surfaces.

• Most glass cleaners will work well, although a good cleaning solution for window film is 1/2 ounce of liquid dish soap added to 1 quart of fresh water.

• A soft cloth or a clean synthetic sponge is recommended for washing the window film, followed by another clean soft cloth or soft rubber squeegee for drying.

• To avoid scratching the film, do not use bristle brushes, abrasive scrubbing sponges, or any cleaning materials that may have been contaminated with dirt particles. Avoid washing interior and exterior windows with the same cleaning materials.

• Some brands of paper towels are coarse enough to put fine scratches in the film, even films with scratch resistant, protective hard-coat finish. While these scratches may be too fine to be seen at first, they can cause damage and reduce the polished look of the film over time.